-
Waler SystemWing Nut
30.00 EGP Add to cartThe Wing Nut is a formwork accessory designed to secure tie rods in place, ensuring the stability and alignment of formwork panels during concrete pouring.
-
Cuplock SystemWTD Adjustable Base Jack
120.00 EGP Add to cartAdjustable base jacks are made of steel plate, screw
jack and steel handle.
adjustable base jacks available in two types (Hollow
and solid). -
Cuplock SystemWTD Adjustable U Jack
120.00 EGP Add to cartAdjustable U-Head jack are made of a “U” shaped
steel plate, screw jack and steel handle.
adjustable U-Head jack are available in two types
(Hollow and solid). -
Cuplock SystemWTD Base Plate
120.00 EGP Add to cartBase Plate provides a flat support for WTD Cuplock
structure.
It uses as simple support for WTD Cuplock structure
in case of no need adjusting level. -
Cuplock SystemWTD Beam Bracket
90.00 EGP Add to cartBeam Bracket have two blade ends connected to
standard.
To provide vertical support for internal beams of
slab and transfer the applied load to WTD Cuplock
Standard. -
-
Cuplock SystemWTD Cantilever Frame
160.00 EGP Add to cartCantilever used To provide vertical support for edge
beams of slab and transfer the applied load to WTD
Cuplock Standard. -
Cuplock SystemWTD Castor Wheel
90.00 EGP Add to cartCastor Wheel Use when Cuplock is erected
as a Mobile Tower. The shank of the wheel fits into
the base of the Cuplock standard. Secured with a
hexagonal head bolt. -
H-Frame SystemWTD Cross Brace
180.00 EGP Add to cartCross and Horizontal brace are considered as
structure link of frame systems manufactured
by steel tube ¾ inch 2mm thickness. -
Cuplock SystemWTD Cuplock Brace
180.00 EGP Add to cartCuplock Brace Diagonal Braces are made from
48.3mm Dia tube with a swivel blade at each
end. Their function is to provide transverse and
longitudinal bracing to scaffold structures. -
Cuplock SystemWTD Decking Beam
600.00 EGP Add to cartDecking Beams including 100mm wide top flange
which provide support for Infill beams.
They span between Dropheads and run in one
direction only. -
Cuplock SystemWTD Drop Head
80.00 EGP Add to cartDrop Head is supported on WTD Cuplock Standard by
Adjustable Jacks, to provides support for Decking beams.
Drop Head provides striking technique for WTD Cuplock
structure.
Menu
